end of life?

the software that eases your everyday life with your digital pictures

end of life?

Postby michaelbudney » Mon Jun 02, 2008 3:27 am

I've read a few other posts here and I hope the product has not come to its end of life. A new version with multi monitor support and full screen thumbnail navigator would be all it needs.

Nothing out there is better. I don\'t understand IrfanView\'s popularity. It is quite bad after using cam2pc. FastStone is close though. I even think they took some ideas from c2p.
michaelbudney
 
Posts: 14
Joined: Wed Aug 27, 2003 5:09 pm

Re: end of life?

Postby Biite » Fri Jun 06, 2008 10:15 pm

I\'ve read a few other posts here and I hope the product has not come to its end of life. A new version with multi monitor support and full screen thumbnail navigator would be all it needs.

Nothing out there is better. I don\\\'t understand IrfanView\\\'s popularity. It is quite bad after using cam2pc. FastStone is close though. I even think they took some ideas from c2p.


I guess you could call it end-of-life, because there\'s not one new version in last few months. No webpage updates either, no reaction from the developer to posts in the forum.
I\'ve seen some messages that the developer is still accepting payments, but is delivering no keys !!!!!

Don\'t understand me wrong, I love the program....
Biite
 
Posts: 5
Joined: Sun Mar 27, 2005 9:13 am

Postby michaelbudney » Sun Jul 06, 2008 6:22 pm

I remember the web site was down a few months ago but it did come back up. So I guess somebody is out there.

Given the increasing popularity of digital photography I'm surprised the product doesn't have more of a push. For what cam2pc does well (transfer, auto hot/dead pixel correction, advanced EXIF editing and full screen viewer) there isn't anything out there quite as good.

I'm always on the lookout for something new/better but so far haven't found anything. I found cam2pc when I was researching writing something similar myself but found someone already had.
michaelbudney
 
Posts: 14
Joined: Wed Aug 27, 2003 5:09 pm

Postby mharvey » Mon Jul 14, 2008 9:13 pm

This program does seem to be \"Mostly Dead\" to me as well. I have all but given up on it. I have switched to using FastStone for my browser and image transfer program. Cam2PC still has a few features that I miss and I would happily resume using it if the author would come around again. He has not posted since Sep 05, 2007. Even that was a short burst of activity (probably due to Vista) after a long lull. Just look at the Version History:

http://www.nabocorp.com/cam2pc/history.php

Version 4.6.1 - 27 October 2007
Version 4.6.0 - 4 March 2007
Version 4.5.2 - 25 March 2005
Version 4.5.1 - 4 January 2005
Version 4.5.0 - 18 December 2004
Version 4.4.5 - 7 November 2004
Version 4.4.4 - 10 October 2004
Version 4.4.3 - 2 October 2004
Version 4.4.2 - 26 September 2004
Version 4.4.1 - 17 September 2004
Version 4.4.0 - 12 September 2004
Version 4.3.6 - 5 July 2004
Version 4.3.5 - 4 July 2004
Version 4.3.4 - 12 June 2004
Version 4.3.3 - 19 May 2004
Version 4.3.2 - 8 May 2004
Version 4.3.1 - 1 May 2004
Version 4.3.0 - 25 April 2004
Version 4.2.0 - 23 March 2004
Version 4.1.1 - 14 January 2004
Version 4.1.0 - 7 January 2004
Version 4.0.2 - 30 October 2003
Version 4.0.1 - 14 October 2003
Version 4.0.0 - 6 October 2003
Version 3.1.2 - 11 April 2003
Version 3.1.1 - 28 March 2003
Version 3.1.0 - 21 March 2003
Version 3.0.1 - 6 December 2002
Version 3.0.0 - 4 November 2002
Version 2.0.3 - 27 April 2002
Version 2.0.2 - 23 April 2002
Version 2.0.1 - 20 April 2002
Version 2.0 - 14 April 2002
Version 1.8 - December 2001
mharvey
 
Posts: 7
Joined: Wed Feb 02, 2005 5:15 am

Postby cmagic » Mon Jul 21, 2008 8:03 pm

Hi,

Well, it really looks like it is the end of the road for cam2pc.
I come back lurking every now and then to see if nabocorp is showing up with some news.
In the meantime I have switched to another product. The best I found to replace cam2pc download ability and much, much more is idimager (http://www.idimager.com/)

best,

Christian
cmagic
 
Posts: 14
Joined: Mon Oct 13, 2003 11:13 pm
Location: Paris, France

idImager

Postby NACarter » Tue Jul 22, 2008 10:13 am

I agree with Christian - I have now moved over to idImager, and it is far more capable than Cam2PC.

Nick
NACarter
 
Posts: 65
Joined: Wed Oct 15, 2003 7:38 pm
Location: Romsey, UK

Take Us To Our Leader

Postby Ardwych » Sat Aug 02, 2008 2:54 pm

I hate to have to say it but there is something that might attract our master back to our software.

If someone who\'s had full use out of cam2PC and moved to an alternative program were to list a serial code here then a new version requiring the re-issue of purchased codes would have to be composed..

Hmm, but that would likely invalidate the contract. Maybe not, then..

[And we could get our \\\\\\\' apostrophes \\\\\\\' fixed!]
Ardwych
 
Posts: 13
Joined: Thu Feb 07, 2008 5:46 pm
Location: Aus

Postby Xyzzy » Thu Aug 07, 2008 8:58 pm

I think finding the serial on the web is easy enough.
On the other hand, posting some link....
Xyzzy
 
Posts: 5
Joined: Wed Apr 05, 2006 8:40 am

Postby Dan » Fri Aug 15, 2008 7:52 am

Cam2Pc is only 15 EUR / 20 USD ... :!:
Beautiful software, much faster and quality viever than other.
Thanks to Nabocorp.
Dan
 
Posts: 17
Joined: Thu Sep 04, 2003 12:33 pm
Location: France : Alpes Sud

Postby mharvey » Mon Aug 30, 2010 3:15 pm

Just checking in to see if Cam2PC had come back to life after being dormant for so long. I guess not. I have moved on to Faststone and XNView but I still wish Cam2PC was being maintained.

I just looked and saw that the domain registration for nabocorp.com is due to expire in about 2 months. I wonder if that will be the end once and for all.
mharvey
 
Posts: 7
Joined: Wed Feb 02, 2005 5:15 am

Rather interesting that Picassa is still not even close

Postby hpolack » Sat Oct 16, 2010 12:37 pm

I wonder why this software was never sold to another company to maintain and expand. It still by far my favorite and was 5 years ahead, in some ways still is, of the competition. I can't believe I still revert back to Cam2PC for uploading my pictures. I have tried to move away, but I can't based on the features. I was spoiled by this product and turn my nose up at the rest when I start to compare features and it seems like I am missing one or two little things that all add up to Cam2PC.

Well, I wonder how many are out there purchased this software and still use it even after no updates for two years. Post if your are :)
hpolack
 
Posts: 1
Joined: Sat Oct 09, 2004 12:59 pm

Re: Rather interesting that Picassa is still not even close

Postby Dan » Thu Oct 21, 2010 8:43 pm

hpolack wrote:Well, I wonder how many are out there purchased this software and still use it even after no updates for two years. Post if your are :)

Me, i'm French, i love Cam2Pc :D
Dan
 
Posts: 17
Joined: Thu Sep 04, 2003 12:33 pm
Location: France : Alpes Sud

Postby Ward » Mon Nov 01, 2010 11:40 pm

It's too bad if Cam2PC is no longer supported/enhanced. I have used it for a few years and it's perfect for what I do with my pictures. I was hoping to find some information on a problem I'm having (the program shuts itself down when I browse certain pictures), but it doesn't sound like it's likely I'd get any help.
Ward
 
Posts: 1
Joined: Mon Nov 01, 2010 11:37 pm

Postby mharvey » Wed Nov 03, 2010 5:10 am

I agree with most of what you have said... too bad it seems to have been abandoned. Time to move on.
mharvey
 
Posts: 7
Joined: Wed Feb 02, 2005 5:15 am

Postby dean ray » Fri Nov 19, 2010 10:43 am

I am new to this site and I joined to know more about the cam2pc product. I have a Nikon Digital camera and I always interface it to my laptop to edit the shots I have. I would want to know the capabilities of this software so I would know whether to purchase one. Thanks

Dean Ray
Vita mix 5200 reviews | Vitamix Recipes | Vitamix
dean ray
 
Posts: 1
Joined: Thu Nov 18, 2010 9:36 pm
Location: USA


Return to cam2pc

Who is online

Users browsing this forum: No registered users and 1 guest